Kept in this browser

Libreria

1123 xU

Design: Enzo Mari · Autoprogettazione, 1974, page 28

Time7.5 h
Pieces75
Nails~230

Wood

Planed furu in the sizes Svenskt Trä lists. Sizes from Svenskt Trä, Lathunden 2021 and Swedish adaptation of Sedia 1 (print). Or use your own stock.

Materials

21 × 45 mm1 × 3.6 m + 5 × 3.3 m
20.1 m
8 × 45 mm5 × 3.3 m + 1 × 2.4 m
18.9 m
Glued panel, 18 × 280 mm wide2 × 3.3 m
6.6 m
Board to buy45.6 m of board, 4.3 m of it offcuts
45.6 m

Add your stock with prices to see what the boards cost.

You’ll need

Planed pine boards21 × 45 mm, 8 × 45 mm, 18 × 280 mm
2 nails at every joint35 mm long, 2 mm across, never both along the same grain
Hammer, hand saw, tape measure and pencil, squareNo glue, no special joints
Cut list and shopping list only, for nowThis piece doesn’t have a 3D guide yet. For assembly, follow the plate on page 28. The lengths are Mari’s, in the nearest boards you can buy; where his boards met at 25 mm, check the fit before cutting the last pieces.
Lay your pieces out like this