Kept in this browser

Panca

1123 xS

Design: Enzo Mari · Autoprogettazione, 1974, page 53

Time2.5 h
Pieces24
Nails~80

Wood

Planed furu in the sizes Svenskt Trä lists. Sizes from Svenskt Trä, Lathunden 2021 and Swedish adaptation of Sedia 1 (print). Or use your own stock.

Materials

27 × 70 mm5 × 3.6 m + 1 × 3.3 m
21.3 m
Board to buy21.3 m of board, 466 mm of it offcuts
21.3 m

Add your stock with prices to see what the boards cost.

You’ll need

Planed pine boards27 × 70 mm
2 nails at every joint45 mm long, 2.5 mm across, never both along the same grain
Hammer, hand saw, tape measure and pencil, squareNo glue, no special joints
Cut list and shopping list only, for nowThis piece doesn’t have a 3D guide yet. For assembly, follow the plate on page 53. The lengths are Mari’s, in the nearest boards you can buy; where his boards met at 25 mm, check the fit before cutting the last pieces.
Lay your pieces out like this