Kept in this browser

Tavolo rotondo

1123 xH · 1200 × 1200 × 700 mm

Design: Enzo Mari · Autoprogettazione, 1974, page 54

Time2.5 h
Pieces23
Nails~70

Wood

Planed furu in the sizes Svenskt Trä lists. Sizes from Svenskt Trä, Lathunden 2021 and Swedish adaptation of Sedia 1 (print). Or use your own stock.

Materials

21 × 95 mm2 × 3.6 m + 2 × 2.4 m
12 m
Sheet materialPlywood or blockboard, on the shopping list
Board to buy12 m of board, 1.1 m of it offcuts
12 m

Add your stock with prices to see what the boards cost.

You’ll need

Planed pine boards21 × 95 mm
2 nails at every joint35 mm long, 2 mm across, never both along the same grain
Hammer, hand saw, tape measure and pencil, squareNo glue, no special joints
Cut list and shopping list only, for nowThis piece doesn’t have a 3D guide yet. For assembly, follow the plate on page 54. The lengths are Mari’s, in the nearest boards you can buy; where his boards met at 25 mm, check the fit before cutting the last pieces.
Lay your pieces out like this